Gas stove troubleshooting
Feb 11, 2022
Gas stoves are kitchen appliances that we use every day. However, in the winter, the gas stoves of some families often have smaller flames and sometimes fail to catch fire. Consumers should not blindly disassemble the gas stoves after encountering these problems. Check it out, experts have given us a detailed answer to these common problems. If you encounter problems in the use of gas stoves, you may wish to pay attention to:
What measures should be taken when using the LPG gas stove for hours?
The normal flame of the liquefied petroleum gas gas stove is light blue, the inner flame of the flame is clear, the height is about 20mm, there is slight noise, and the firepower is strong. If there is a small flame, the reasons and elimination methods are as follows:
1) The fire hole of the burner fire cover is blocked by dirt, which hinders the outflow of the mixed gas of the burner, and cleans the dirt in the fire hole.
2) The nozzle is blocked, unscrew the nozzle and clean it up.
3) The air inlet and nozzle of the pressure regulator are blocked by rust, which hinders the outflow of gas in the bottle. Replace the qualified pressure regulator.
4) The hose is folded and flattened and the ventilation is blocked, straighten the hose.
5) In addition, the gas is about to be used up, and the valve is not fully opened. You should also pay attention to the reasons, and take corresponding measures to solve it.
Why does the flame of the gas stove become smaller in winter?
Is it normal for the gas stove to appear red? Why does the stove appear red?
The red fire of the gas stove is mainly caused by the following reasons:
1) Gas reasons: When there is too much moisture or impurities in the combustion gas, the color of the flame will appear red.
2) Causes of dust: When there is dust in the house or the amount of moisture and oil and gas in the air increases when cooking, it is also prone to red fire.
3) The reason for the damper: when the damper is not well adjusted, this situation may also occur. At this time, it is only necessary to adjust the damper.
4) Reasons for the pot holder: Because the enamel on the surface of the pot holder turns red when heated at high temperature, due to the special material of the enamel, the flame around the pot holder will be red, which is the color of metal ions at high temperature.
https://www.wxrisen.com/
