Gas stove use and maintenance
Feb 16, 2022
1. According to national regulations, the service life of general household stoves is 8 years. After the expiration, the user should cancel it in time to avoid hidden dangers.
2. It is often used to check whether there is leakage at the interface of the gas supply pipeline, whether the rubber hose is in good condition, and whether there are cracks due to aging. Once found, it should be replaced in time. The inspection steps are as follows:
(1) Please configure proper amount of soapy water for leak detection.
(2) Open the ventilation valve to make the air source unobstructed.
(3) Check whether there is air leakage at the connection of the pressure reducing valve (only applicable to liquefied gas): dip a small amount of soapy water, drop it on the connection between the pressure reducing valve and the liquefied gas tank, and observe whether there are air bubbles. Consult the user to replace the pressure reducing valve.
(4) Check whether there is air leakage at the interface connecting the hose: the same as the above testing method.
(5) If the above methods still can't remove the air leakage, you need to visit the door for maintenance.
3. Users of stoves should regularly clean the fire holes on the fire cover to prevent clogging, and should regularly clean the dust, spider webs and other debris in the stove.
4. After the fire cover of the cooker is damaged, it is necessary to buy the original product, and it cannot be replaced at will, so as to avoid poor combustion state.
5. When the air intake hose is used for a long time, it will be aged or damaged, causing a potential safety hazard. Therefore, when the air intake hose is aging, it should be replaced in time, and it must not be used after it has been repaired with adhesive tape.
6. Users who use artificial gas or other special gas sources must always clean the fire holes on the fire cover to avoid clogging.
7. Different gas sources require different gas stoves. Please pay attention to this when purchasing. If the gas source you use has changed, be sure to ask the original manufacturer to modify your cooker accordingly before using it.
https://www.wxrisen.com/
